Visual signals

The LEDs give important information about the state of the Asyfill. The behavior is presented in Table 10.

Table 10 LEDs behavior

Led	Signal	Color	Meaning
Status	200/800 ms ON/OFF	green	System is ready
	solid	blue	System vibrates
	200/800 ms ON/OFF	red	System error
	200/800 ms ON/OFF	blue	Calibration process on-going
	solid for 5 s	green	Calibration done, new parameters applied Acknowledge reset IP address to default
	solid for 5 s	red	Calibration failed, keep old parameters
Power	solid	green	24 VDC on Power input is valid

Push-buttons

The functionality of the two push-buttons is described in Table 11.

Table 11 Push-buttons functionality

Push-button	Action	Effect
Calib.	long press 5 s	Start a calibration procedure
Reset IP	power up while pressed	Reset both calibration and IP settings
Reset IP	long press 5s	Reset IP settings

Note

For more information about the calibration procedure, please refer to calibration procedure.