Warning

You are reading an old version of this documentation. If you want up-to-date information, please have a look at 2024.12 .

Input interface

A standard M8 4-pole interface allows vibrations to be triggered with a 0-10 VDC analog signal.

Fig. 26 Input interface, M8 4-poles, male, panel view

Pin	Signal
(1)	GND
(2)	digital 24 VDC (not used)
(3)	GND
(4)	analog 0-10 VDC

The Input interface of the Asyfill must be connected to one of the Asycube OUT port by using the Analog cable as shown in Fig. 27.

Fig. 27 Connection with Asycube

How to interface multiple Asyfill

For multi-feeding applications, several Asyfill are generally required. The table below shows the possible variants to connect the Asyfill.

Table 9 How to interface multiple Asyfill

	With EYE+	Without EYE+
One Asyfill	Comm. 1 / Input interface	Input interface
Two Asyfill	Comm. 1 / Input interface	Input interface
Three Asyfill	Comm. 1	2
Four Asyfill	Comm. 1	2

¹ Available from EYE+ version 4.3 and Asyfill version 1.1.

² Only possible with tailor made integration through a PLC.