Visual signals

The LEDs give important information about the state of the Asyfill. The behavior is presented in Table 10.

Table 10 LEDs behavior

Led	Behavior	Meaning	Pattern
Status	200/800 ms ON/OFF	System is ready
	Solid ON	System vibrates
	200/800 ms ON/OFF	System error
	200/800 ms ON/OFF	Calibration process on-going
	Solid for 5 s	Calibration done, new parameters applied Acknowledge reset IP address to default
	Solid for 5 s	Calibration failed, keep old parameters
	Flashing for 2 s	Reset is confirmed
	Flashing for 1 s	Booting sequence
Power	Solid	24 VDC on Power input is valid

Push-buttons

The functionality of the two push-buttons is described in Table 11.

Table 11 Push-buttons functionality

Push-button	Action	Effect
Calib.	long press 5 s	Start a calibration procedure
Reset IP	long press 5 s [1]	Reset IP settings
Reset IP	power up while pressed	Reset both calibration and IP settings

[1]

Release the button when the LED status starts flashing. Pressing longer will reset IP settings AND calibration.

Note

For more information about the calibration procedure, please refer to calibration procedure.