Warning

You are reading an old version of this documentation. If you want up-to-date information, please have a look at 2024.5 .

Visual signals

The LEDs give important information about the state of the Asyfill. The behavior is presented in Table 8.

Table 8 LEDs behavior

Led	Signal	Color	Meaning
Status	200/800 ms ON/OFF	green	System is ready
	solid	blue	System vibrates
	200/800 ms ON/OFF	red	System error
	200/800 ms ON/OFF	blue	Calibration process on-going
	solid for 5 s	green	Calibration done, new parameters applied Acknowledge reset IP address to default
	solid for 5 s	red	Calibration failed, keep old parameters
Power	solid	green	24 VDC on Power input is valid

Push-buttons

The functionality of the two push-buttons is described in Table 9.

Table 9 Push-buttons functionality

Push-button	Action	Effect
Calib.	long press 5 s	Start a calibration procedure
Reset IP	N/A	Reserved for future use

Note

For more information about the calibration procedure, please refer to calibration procedure