Power connection

A standard M16 5-pin female cable powers the Asyfill.

Important

  • Before supplying power to the Asyfill, check that your distribution voltage is the same as the nominal voltage.

  • Use PELV (protected extra-low voltage) nominal voltage.

  • Check the correct polarity of your 24 VDC power plug before connection.

  • It is recommended to supply each Asyfill with a dedicated power supply.

../../_images/connector_supply.png

Fig. 29 24 VDC interface, M16 5-pole, male, panel view

Pin

Signal description

Cable # (option)

(1) - (3)

24 VDC

1 - 3

(2) - (4)

GND

2 - 4

(5)

EARTH

PE

Characteristic

Asyfill S 1/2L

Asyfill M 3/7L

Asyfill L 14L

Voltage

+24V DC +5%

+24V DC +5%

+24V DC +5%

24VDC Power Consumption

5A [1]

10A [2]

10A [2]

Note

The following power supplies have been tested by Asyril with a 5m cable:

  • Asyfill M/L: PULS CS10.241, input AC 100-120V/200-240V, output DC 24-28V 10A

  • Asyfill S: PULS CS5.241, input AC 100-120V/200-240V, output DC 24-28V 5A