Warning

You are reading an old version of this documentation. If you want up-to-date information, please have a look at 2024.12 .

Input interface

A standard M8 4-poles interface allows to trigger vibrations with a 0..10 VDC analog signal.

../../_images/connector_input.png

Fig. 24 Input interface, M8 4-poles, male, panel view

Pin

Signal

(1)

GND

(2)

digital 24 VDC (not used)

(3)

GND

(4)

analog 0..10 VDC

The Input interface of the Asyfill must be connected to one of the Asycube OUT port by using the I/O cable as shown in Fig. 25.

../../_images/connect_asycube.png

Fig. 25 Connection with Asycube