Warning

You are reading an old version of this documentation. If you want up-to-date information, please have a look at 2024.12 .

Possible variants

The table below summarizes which Asyfill can be used in conjunction with which Asycube in single part feeding or multi-feeding with two parts:

Table 4 Single part feeding

	Asyfill S		Asyfill M		Asyfill L
	1L	2L	3L	7L	14L
Asycube 240	yes	yes	yes	yes 1	N/A
Asycube 380	yes	yes	yes	yes	yes 1
Asycube 530	yes	yes	yes	yes	yes

Table 5 Multi-feeding with two parts

	Asyfill S		Asyfill M		Asyfill L
	1L	2L	3L	7L	14L
Asycube 240	yes	N/A	N/A	N/A	N/A
Asycube 380	yes	yes	yes	yes 2	N/A
Asycube 530	yes	yes	yes	yes	yes 2

¹ single part feeding possible on the long side of the Asycube only, see illustrations below.

² multi-feeding with two parts possible on different short sides of the Asycube only, see illustrations below.

Note

When pairing Asyfill M or L with Asycube 380 and Asycube 530, the optional Modular fixation kit for Asyfill M and L allows the Asyfill to be mounted at the ideal height. This kit is not needed when pairing an Asyfill with Asycube 240.

Note

When two Asyfill can be mounted on the same long side of the Asycube, a multi-feeding application with up to 4 parts can also be considered by mounting 4 Asyfill symmetrically. If your application requires a configuration with more than two Asyfill, please contact our support team from our website.

The images below illustrate the different alternatives of pairing one or two Asyfill with an Asycube.

Asyfill S 1/2LAsyfill M 3/7LAsyfill L 14L

Fig. 11 Single part feeding: Asycube 240 with Asyfill S 1L (left) and Asyfill S 2L (right)

Fig. 12 Multi-feeding with two parts: Asycube 240 split with two Asyfill S 1L