Warning

You are reading an old version of this documentation. If you want up-to-date information, please have a look at 2024.5 .

Modular Fixation Kit

A modular fixation kit allows the Asyfill to be mounted at the ideal height. This fixation kit is typically required for the Asyfill M or L to fit the Asycube 380 or 530.

Fig. 28 Asyfill L mounted on the modular fixation kit to fit the Asycube 530

Note

The modular fixation kit is not compatible with the Asyfill S 1/2L.

Dimensions

Table 13 Fixation kit - dimensions

Dimensions (mm)	Asyfill M	Asyfill L
A	141	206
B	185-260 in steps of 15, see Table 14
C	334
D	469
E	67.5
F	77	142
G	300
H	9
I	9
J	2

Recommended Height

The table below gives the recommended height of the fixation kit for Asyfill M or L when paired with an Asycube 380 or 530. This height depends on the Asycube frame height and on the feeding configuration (long side or short side).

Table 14 Fixation kit - recommended height

Asycube type	Asycube 380				Asycube 530
Frame height	H=60mm		H=85mm		H=68mm		H=100mm
Feeding side	long	short	long	short	long	short	long	short
Fixation kit height B (mm)	185	200	200	215	200	215	230	245

Assembly of the Fixation Kit

• Step 1 Choose the fixation height and fasten 2x M6 screws with a maximal torque of 4 Nm

• Step 2 Secure by fastening 4x M6 screws with a maximal torque of 4 Nm

• Step 3 Repeat for the second half of the fixation kit

Fig. 29 Modular fixation kit assembled