Modular Fixation Kit M/L

This fixation kit allows the Asyfill M or L to be mounted at the ideal height. This fixation kit is typically required for the Asyfill M or L to fit the Asycube 380 or 530.

Fig. 31 Asyfill L mounted on the fixation kit to fit the Asycube 530

Note

The fixation kit for Asyfill M/L is not compatible with the Asyfill S. For Asyfill S, use the fixation kit for Asyfill S

Dimensions

Table 15 Modular fixation kit M/L - dimensions

Dimensions (mm)	Asyfill M	Asyfill L
A	141	206
B	185-260 in steps of 15, see Table 16
C	334
D	469
E	67.5
F	77	142
G	300
H	9
I	9
J	2

Recommended Height

The table below gives the recommended height of the fixation kit for Asyfill M or L when paired with an Asycube 380 or 530. This height depends on the Asycube frame height and on the feeding configuration (long side or short side).

Table 16 Modular fixation kit M/L - recommended height

Asycube type	Asycube 380				Asycube 530
Frame height	H=60mm		H=85mm		H=68mm		H=100mm
Feeding side	long	short	long	short	long	short	long	short
Fixation kit height B (mm)	185	200	200	215	200	215	230	245

Assembly

• Step 1 Choose the fixation height and fasten 2x M6 screws with a maximum torque of 4 Nm

• Step 2 Secure by fastening 4x M6 screws with a maximum torque of 4 Nm

• Step 3 Repeat for the second half of the fixation kit

Fig. 32 Modular fixation kit assembled