Interface Input

A standard M8 4-pole interface allows vibrations to be triggered with a 0-10 VDC analog signal.

Fig. 26 Interface d’entrée, M8 4 pôles, mâle, vue du panneau

Pôle	Signal
(1)	GND
(2)	digital 24 VDC (non utilisé)
(3)	GND
(4)	analog 0-10 VDC

The Input interface of the Asyfill must be connected to one of the Asycube OUT port by using the Analog cable as shown in Fig. 27.

Fig. 27 Connexion avec l’Asycube

How to interface multiple Asyfill

For multi-feeding applications, several Asyfill are generally required. The table below shows the possible variants to connect the Asyfill.

Tableau 9 How to interface multiple Asyfill

	With EYE+	Without EYE+
One Asyfill	Comm. 1 / Input interface	Interface Input
Two Asyfill	Comm. 1 / Input interface	Interface Input
Three Asyfill	Comm. 1	2
Four Asyfill	Comm. 1	2

¹ Available from EYE+ version 4.3 and Asyfill version 1.1.

² Only possible with tailor made integration through a PLC.